|
|
1.HIGH FEEICIENY-
This unit is excellent for the efficient milling of square stocks into prefect round rods at a very high feed rate, up to sixteen meters per minute. |
2. 4 FEED SPEED RATES -
The different speeds allow this machine to cut a wide variety of materials while maintaining a high quality of cut with smooth surface. |
3. REVERSIBLE FEED-
This enables the machine to feed stocks forward for cutting and can immediately retract then in case of jamming |
4. ACCESSORIES AVALABLE
The machine comes furnished with standard features such as the cutterhead, outfeed rollers and brush for producing one size of rod diameter. When required, accessories are available for producing additional diameters of rod, See the illustration below for accessories available. |
|
| |
 |
The machine comes standard with accessories standard with accessories for cutting one rod diameter only. The infeed rollers and feed any size with in the quoted diameter range. |
| |
 |
The units are designed for the perfect production of round rods from square stock. |
| |
 |
| |
Model |
FS-60 |
Cutting capacity |
10-60mm(3-8"-2/3/") |
Minimum length of stock |
300mm |
| Cutterhead drive motor |
5HP |
Feed motor |
2HP |
| Cutterhead speed |
3000 R.P.M |
| Feed speeds |
6,9,13,16 m/min |
| Knives |
2 |
| Net weight |
300kgs |
| Gross weight |
400kgs |
| Machine Dimesions(L*W*H) |
920*760/1000 |
| Packing Dimesions(L*W*H) |
1000*750*1100mm |
| Design and specifications are subject to change without prior notice. |
|
|
